Bike #1 Stack:

Bike #1 Reach:

Bike #1 Head Tube Length:

Bike #1 Bike #1 Seat Tube Length:

Bike #1 Fork Length (not required):

Bike #1 Fork Trail/Offset (not required):

Bike #1 Bottom Bracket Drop (not required):

Bike #1 Chainstay Length (not required):

Bike #1 Head Tube Angle (degrees):

Bike #1 Seat Tube Angle (degrees):

Bike #1 Saddle Height (center of bottom bracket to center of saddle):

Bike #1 Saddle Setback (center of bottom bracket to tip of saddle horizontal measurement - use "-" only if saddle tip is in front of bottom bracket):
Be aware that changing saddles may impact this measurement. A short-nosed saddle will increase BB setback by the corresponding difference in length with a traditional saddle (~30mm) while the effect on fit measurements may be unchanged, and will also increase the measurment from the tip of the saddle to the bar. Be sure to account for this difference when comparing 2 bikes.

Bike #1 Saddle Angle (use "-" for nose down angle):

0

Bike #1 Saddle Length (short saddles are typically 240, standard saddles are typically 270):

Bike #1 Stem Length:

100

Bike #1 Stem Angle (use "-" for negative angle:

6

Bike #1 Top of Head Tube to Top of Stem (40mm for stem clamp plus spacers, number can't be less than 40 or more than 90):

75

Bike #1 Bar Reach:

Bike #2 Stack:

Bike #2 Reach:

Bike #2 Head Tube Length:

Bike #2 Seat Tube Length:

Bike #2 Fork Length (not required):

Bike #2 Fork Trail/Offset (not required):

Bike #2 Bottom Bracket Drop (not required):

Bike #2 Chainstay Length (not required):

Bike #2 Head Tube Angle (degrees):

Bike #2 Seat Tube Angle (degrees):

Bike #2 Saddle Height (center of bottom bracket to center of saddle):

Bike #2 Saddle Setback (center of bottom bracket to tip of saddle horizontal measurement - use "-" only if saddle tip is in front of bottom bracket):
Be aware that changing saddles may impact this measurement. A short-nosed saddle will increase BB setback by the corresponding difference in length with a traditional saddle (~30mm) while the effect on fit measurements may be unchanged, and will also increase the measurment from the tip of the saddle to the bar. Be sure to account for this difference when comparing 2 bikes.

Bike #2 Saddle Angle (use "-" for nose down angle):

0

Bike #2 Saddle Length (short saddles are typically 240, standard saddles are typically 270):

Bike #2 Stem Length:

110

Bike #2 Stem Angle (use "-" for negative angle:

6

Bike #2 Top of Head Tube to Top of Stem (40mm for stem clamp plus spacers, number can't be less than 40 or more than 90):

75

Bike #2 Bar Reach:

Horizontal measurement from tip of saddle to center of bar will be displayed here

Vertical drop from saddle center top to top of bar will be displayed here

Angled measurement from tip of saddle to top of bar center will be displayed here

Angled measurement from tip of saddle to furthest point of bar (based on bar reach) will be displayed here

Horizontal measurement from tip of saddle to center of bar for Bike #2 will be displayed here

Vertical drop from saddle center top to top of bar for Bike #2 will be displayed here

Angled measurement from tip of saddle to top of bar center for Bike #2 will be displayed here

Angled measurement from tip of saddle to furthest point of bar (based on bar reach) for Bike #2 will be displayed here